Satin Brass

The Narrow Stick burner has two layers, an ash catch on the bottom and a holder for short or long incense sticks on top. The top layer has a patented orifice for holding the incense which allows the stick remnant to fall into the ash catch below. The holder accommodates a variety of stick diameters and a narrow slot allows fallen ash to drop into the catch below. The sticks should be placed in the holder as horizontal as possible, gently rolling the stick can help to position the incense.

dimensions: approximately .75" wide x 6.125" long x .75" high

PATENT PENDING

made in Arizona

Polished Nickel

The Tall Box Burner has four stacking layers – a base for storage of short or long incense sticks, an ash catch, an incense holder with patented orifice that allows stick remnants to drop into ash catch, and a cover with a slot for release of smoke. When stacked, the long slots on the sides allow air flow. The cover has a faceted surface on the interior that guides the smoke to the slot. The cover conceals the burning stick and the ash below. If preferred, the cover can be left off during burning. The holder works for a variety of stick diameters, and positions of the stick. When burning with the cover on, the incense sticks should be placed as horizontal as possible.

The Tall Box Burner packaging consists of a traditional Japanese cloth and a wooden box intended for reuse. There are an infinite number of ways the box and cloth can be used. The cloth gets better with age- it can be washed in cold water and hung to dry.

dimensions: 2.25" wide x 8" long x 1.625" high

PATENT PENDING

made in Arizona

Polished Nickel

The Tall Cylinder Burner has three stacking layers – a base for storage of cone or spiral incense, a middle layer with an incense holder and ash catch, and a cover to conceal the burning incense and ash with an oculus for release of smoke. The agave holder in the middle layer allows the incense to properly burn, as oxygen can make its way all around and beneath the incense. The three slots between the middle and cover layer allow air in and the domed interior of the cover directs the smoke to the oculus.

The Tall Cylinder Burner packaging consists of a traditional Japanese cloth and a wooden box intended for reuse. There are an infinite number of ways the box and cloth can be used. The cloth gets better with age – it can be washed in cold water and hung to dry.

dimensions: 3" diameter, 3.75" high

PATENT PENDING

made in Arizona

Satin Nickel

The Agave Holder is designed to hold a stick, cone or spiral incense. Inspired by the beautiful Agave plant, the sharp points delicately hold the spiral and cone incense, allowing oxygen below the incense for a complete burn. The hole in the middle is for placing a stick incense. As the Agave Holder is intended to be placed on your own tray or plate to catch the ash – metal, stone, porcelain, glass – it folds in to any aesthetic. A pin is included with the Agave Holder, intended to be used after burning a stick. Push the pin through the hole on the bottom of the agave to release the stick remnant.

dimensions: 1.25" diameter x .625" high

made in Arizona